Home / Products / Supply air cleaning / Panel miniplate filters type FyaS-F-PMP classes F6-F7

Panel miniplate filters type FyaS-F-PMP classes F6-F7

Minipleated panel filters FyaS-F-PMP are designed for cleaning supply and exhaust air in ventilation and air conditioning systems. The filters are capable of providing effective air purification and are produced in classes F6-F7.

How to order

Leave a request and we will contact you to clarify the details of your order and select the necessary equipment.

fyas-f-pmp_big 1fyas-f-pmp_big 1

The compactness of these filters makes it possible to solve the problem of effective air purification in case of limited space for their placement.

Technical requirements and characteristics of miniplates of panel filters (FyaS-F-PMP)

Filter class
FyaS-F-PMP according to GOST R
51251-99 (EN-779)		 Nominal specific
air load
m 3 /h*m 2		 Initial resistance, Pa Recommended final
F6 9200 120 350
F7 9200 190 350

The environment and filtered air must not contain aggressive gases and vapors. The filter parameters were determined according to GOST R 51251-99 and EN 779-2002.

General design of miniplates of panel filters (FyaS-F-PMP)

FyaS-F-PMP filters consist of a housing (cardboard, galvanized steel) and a mini-pleated filter bag.

Main standard sizes of miniplates of panel filters (FyaS-F-PMP)

Filter index Overall dimensions, mm Filter capacity 3 /h
FyaS-F-PMP height A width B depth L
*050 500 500 48 2300
*052 592 592 48 2600
*051 592 287 48 1300
*054 592 490 48 2600
*053 287 490 48 1300
*056 610 610 48 3400
*055 610 305 48 1700
*0501 287 287 48 600
*0505 305 305 48 850
*058 892 287 48 2300
*059 892 490 48 4000
*057 892 592 48 4800

* – figure indicating filter class 6ch7, corresponding to filter class F6chF7. Filters of other sizes can be produced upon request.

Maintenance of miniplates of panel filters (FyaS-F-PMP)

During the operation of filters, their aerodynamic resistance should be monitored according to the readings of a pressure gauge connected to fittings located in the walls of the air-cleaning chambers before and after the filters.

When the differential pressure recommended for a given filter is reached, or based on the available pressure in the system, the filters must be replaced.

The manufacturer reserves the right to make changes to the design without compromising the technical characteristics of the product.

Download in PDF

Related products