Cyclones type TsN-15
Designed for dry purification of air and gases released during certain technological processes (drying, roasting, agglomeration, fuel combustion, etc.), as well as purification of aspiration air. They are used in enterprises of ferrous and non-ferrous metallurgy, chemical, oil and engineering industries, construction materials industry, energy, etc. The use of cyclones type TsN-15 is unacceptable in explosive environments; It is also not recommended to use them for collecting highly clumping dusts, especially with small diameters of cyclones.
How to order
Leave a request and we will contact you to clarify the details of your order and select the necessary equipment.
Depending on the gas capacity and application conditions, cyclones are manufactured in a single design (internal diameter from 200 to 2000 mm) or in a group design – from two, four, six and eight cyclones of the same internal diameter (from 300 to 900 mm). Group cyclones are manufactured with “left” and “right” rotation of the gas flow, single ones – only with “right” rotation.
Depending on the layout, group cyclones can be with a purified gas chamber in the form of a “snail” or in the form of a collector, and single cyclones only with a “snail”. Cyclone bunkers are pyramidal in shape. When operating cyclones, continuous dust discharge must be ensured. In this case, the dust level in the bunkers should not be higher than a plane located from the bunker lid at 0.5 of the cyclone diameter.
The technical specifications show performance values related to the speed in the cylindrical part of the cyclone V=2.5 and 4.0 m/s. Under normal conditions, the optimal speed is 4.0 m/s. A speed of 2.5 m/s is recommended when working with abrasive dust. Depending on the ambient temperature, cyclones are made of carbon steel (at temperatures up to -40°C) and low-alloy steel (at temperatures below -40°C).
Symbol
- C-cyclone;
- N – NIIOgaz design;
- number 15 – angle of inclination of the inlet pipe relative to the horizontal (degrees);
- numbers after the dash: first – internal diameter of the cylindrical part of the cyclone (mm);
- the second (after the multiplication sign) is the number of cyclones in the group;
- U – with a purified gas chamber in the form of a “snail”;
- C – with a purified gas chamber in the form of a collection;
- P – pyramidal shape of the bunker.
Basic parameters of cyclones (TsN-15)
Mass concentration of dust in the purified gas, g/m3:
- for weakly cohesive dusts no more than 1000
- for medium clinging dusts 250
- Temperature of the purified gas, °C no more than 400
- Pressure (vacuum), kPa (kgf/m2) no more than 5 (500)
- Hydraulic resistance coefficient of cyclones:
- for single execution 147
- for group performance:
- with “snail” 175
- with collection 182
- Delivery set: cyclones in enlarged blocks.
Recently viewed
-
Purification of ventilation emissionsVentilation dust collection unit ZIL – 900M
Specify the priceСучасним аналогом вентиляційного пиловловлюючого агрегату ЗІЛ-900М - є ІРП! Вентиляційний пиловловлюючий агрегат...
-
Supply air cleaningSection of pocket filters type SKF
Specify the priceСекція кишенькового фільтра типу СКФ призначена для встановлення та герметизації кишенькових фільтрів типу ФяК та...
-
Supply air cleaningCompact folded cell filters type FyaS-K
Specify the priceФільтри ФяС-К призначені для ефективного очищення повітря від дрібнодисперсних аерозолів у системах припливної...
-
CyclonesSluice gate
Specify the priceПризначені для забезпечення рівномірного безперервного вивантаження сухих, сипких продуктів (пилоподібних, зернистих і...








